Multitel MX 250 - Optional Components; Technical Data; Layout Measurements; Work Area Diagram

To Next Page

To Previous Page

Use and warning instructions in compliance with EC regulations - Page 34

4.5. OPTIONAL COMPONENTS

For the optional components of the machine, please refer to the annex “OPTIONS” in the “ANNEXES” section.

4.6. TECHNICAL DATA

For the machine technical data, please refer to the annex “EDT” in the “ANNEXES” section.

4.7. LAYOUT MEASUREMENTS

For the layout measurements of the machine, please refer to the speciﬁc annex in the “ANNEXES” section.

4.8. WORK AREA DIAGRAM

For the work area diagrams of the machine, please refer to the speciﬁc annex in the “ANNEXES” section.

4.9. STABILIZATION FOOTPRINT

For the stabilization footprint of the machine, please refer to the speciﬁc annex in the “ANNEXES” section.