Use and warning instructions in compliance with EC regulations - Page 20
ATTENTION!
Prior to operating the machine, all users and maintenance personnel are required to be perfectly
familiar with:
♦ the position, function and use of all commands;
♦ the position, function and use of all safety devices;
♦ the machine characteristics;
♦ this manual and its annexes and how to refer to it;
♦ the operational instructions and the safety instructions contained in the manual
ATTENTION!
In case of doubt on the proper interpretation of the instructions, it is prohibited to operate the
machine. Refer to the paragraph entitled "GLOSSARY OF TERMS USED" to find out the meaning
of certain terms used in the manual, and contact the Manufacturer or an Authorized Assistance
Centre to obtain the necessary explanations.
3.9.1. SAFETY DISTANCE FROM DITCHES/ESCARPMENTS.
DANGER!
When operating the outriggers, always keep the required safety distance from ditches/escarpments.
The safety distance depends on:
♦ type of ditch/escarpment (underpropped or not);
♦ type of soil.
ATTENTION!
Prior to operating the outriggers, for all types of soil always consider the following:
♦ solidity/consistency;
♦ admissible pressures.
ATTENTION!
To evaluate the consistency of the soil or the safety distance from ditches/escarpments, it is always
advisable to consult with the worksite manager or an expert (for example, a civil engineer).
3.9.2. WARNINGS FOR PRUNINGS AND NURSERYMEN.
DANGER!
Prevent any cut logs, branches, etc. from falling on the platform, on the safety devices, on any
vehicles parked nearby or workers on the ground.
DANGER!
Use the chain saws in the basket with care: this type of tool generates a considerable dragging
force in an outward direction.
DANGER!
Do not interpose the arms of the machine and the operator between the ground and the tree
(branch, shrub, etc.) to be cut, in order to prevent the plant from crashing down onto the platform
and cause it to tip over.
To Next Page
Loading...