EasyManuals Logo

NETGEAR Nighthawk D7000 User Manual

NETGEAR Nighthawk D7000
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #122 background imageLoading...
Page #122 background image
DescriptionField
network.You cannot change the mode in the 5 GHz band
for the guest WiFi network.
By default, the guest WiFi network is disabled.To enable
the guest WiFi network for the 5 GHz WiFi band, select the
Enable Guest Network check box.
Enable Guest Network
By default, the modem router broadcasts its SSID of the 5
GHz WiFi band so that WiFi stations can detect the WiFi
Enable SSID Broadcast
name (SSID) in their scanned network lists.To turn off the
SSID broadcast for the 5 GHz WiFi band for the guest WiFi
network, clear the Enable SSID Broadcast check box.
By default, WiFi clients that are connected to the 5 GHz WiFi
band of the guest WiFi network cannot access WiFi devices
Allow guests to see each other and
access my local network
or Ethernet devices that are connected to the main WiFi
network. To allow access to the main WiFi network, select
the Allow guests to see each other and access my local
network check box.
Security Options
If you want to change the WiFi security, select one of the following WiFi security options for the 5 GHz
band of the guest WiFi network:
•
None. An open WiFi network that does not provide any security. Any WiFi device can join the
5 GHz band of the guest WiFi network. This is the default setting for the guest WiFi network.
•
WPA2-PSK [AES]. WPA2 provides a secure and fast connection but some older WiFi devices
do not detect WPA2 and support only WPA. Select WPA2 to allow 802.11n devices to connect
to the 5 GHz band of the guest WiFi network at the fastest speed. If your network includes older
devices that do not support WPA2, select WPA-PSK [TKIP] + WPA2-PSK [AES] security.
To use WPA2 security, in the Passphrase field, enter a phrase of 8 to 63 characters.To join the
5 GHz band of the guest WiFi network, a user must enter this passphrase.
•
WPA-PSK [TKIP] + WPA2-PSK [AES].This type of security enables WiFi devices that support
either WPA or WPA2 to join the 5 GHz band of the guest WiFi network. However, WPA-PSK
[TKIP] is less secure than WPA2-PSK [AES] and limits the speed of WiFi devices to 54 Mbps.
Manage the WiFi Network Settings
122
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000

Table of Contents

Other manuals for NETGEAR Nighthawk D7000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR Nighthawk D7000 and is the answer not in the manual?

NETGEAR Nighthawk D7000 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
WLAN data transfer rate (max)1300 Mbit/s
USB version3.2 Gen 1 (3.1 Gen 1)
Rack mountingNo
Bandwidth (first)2.4 GHz
Bandwidth (second)5 GHz
USB ports quantity2
WLAN data transfer rates supported600, 1300 Mbit/s
Memory card slot(s)-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports5
DSL specificationVDSL, VDSL2, ADSL, ADSL2, ADSL2+
Antennas quantity3
Security algorithmsWPA, WPA2-PSK, WPS
Product typeTabletop router
Product colorBlack
Flash memory128 MB
Internal memory256 MB
Processor frequency1000 MHz
Cables includedLAN (RJ-45)
Power source typeAC
Weight and Dimensions IconWeight and Dimensions
Depth185 mm
Width285 mm
Height50 mm
Weight750 g

Related product manuals