The password (network key) is on the product label.
Your computer or WiFi device connects to the modem router’s WiFi network.
If the computer is set to a static (fixed) IP address (this setting is uncommon), either
change the computer to obtain an IP address automatically from the modem router
Note
through DHCP, or change the IP address of the computer to a static IP address in
the 192.168.0.2–192.168.0.254 range.
10. Launch a web browser.
The modem router checks the Internet connection.
If the NETGEAR genie automatic setup utility displays, skip to Step 12. If it does not display, do the
following:
a. In the address field of the web browser, enter www.routerlogin.net.
b. When prompted, enter admin for the user name and password for the password.
If the NETGEAR genie automatic setup utility displays, skip to Step 12. If the NETGEAR genie automatic
setup utility still does not display, see Step 11.
11. If the browser cannot display the web page, do the following:
Install and Access the Modem Router and Its Network
34
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
