DescriptionField
This setting does not apply to the IPTV interface.Note
Enter a number between 0 and 255 for the virtual circuit number for
the virtual path identifier (VPI), as indicated by your ISP.
VPI
If your ISP did not provide you with a VPI setting, leave the default
setting (8).The VPI might be required not only for a VC-based
connection but also for an LLC-based connection.
This setting does not apply to the IPTV interface.Note
Enter a number between 32 and 65535 for the virtual circuit number
for the virtual channel identifier (VCI), as indicated by your ISP.
VCI
If your ISP did not provide you with a VCI setting, leave the default
setting (35).The VCI might be required not only for a VC-based
connection but also for an LLC-based connection.
This setting does not apply to the IPTV interface.Note
Select the Use VLANID check box and enter the VLAN ID, as
indicated by your ISP.
Use VLANID
A VLAN ID might be required if you subscribe to both Internet service
and IPTV service. If your ISP did not provide you with a VLAN ID,
leave the Use VLANID check box cleared, which is the default
setting.
If your ISP provided you with a VLAN ID and a priority value, enter
the priority value, which is a number from 0 to 7.
Priority (0 ~ 7)
You can enter a priority value only in combination with a VLAN ID.
If your ISP did not provide you with a priority value, leave the default
setting (0).
This setting is an option that applies to the IPTV interface only.Bridge Mode
Manage the Internet Settings Manually
54
Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
To Next Page
Loading...
Need help?
General
Weight and Dimensions
