EasyManuals Logo

NETGEAR WiFi 6 AX1800 User Manual

NETGEAR WiFi 6 AX1800
249 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #114 background imageLoading...
Page #114 background image
LAN IP address settings [router mode]
If the AP is in router mode, the LAN subnet defines the LAN IP address settings for the
AP, including the IP address at which you can access the AP over the local browser UI,
the DHCP IP address settings, and the Router Information Protocol (RIP) settings.
Note: The information in this section and subsections does not apply if the AP is in
access point mode.
Change the LAN IP address and subnet settings [router
mode]
If the AP is in router mode, it is preconfigured to use private IP addresses on the LAN
side and to function as a DHCP server. The AP’s LAN IP configuration is as follows:
•
LAN IP address. 192.168.1.1 (if the AP is in router mode, this is the same as
www.routerlogin.net)
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private
networks and are suitable for most applications. The IP address and subnet mask identify
which addresses are local to a specific device and which must be reached through a
gateway or router. If you need a specific IP subnet that one or more devices on the
network use, or if competing subnets use the same IP scheme, you can change the LAN
IP address settings.
Note: If you change the default LAN IP address settings, the IP address range for the
default DHCP server also changes (see Manage the DHCP server address pool [router
mode] on page 115).
To change the LAN IP address and subnet settings:
1.
Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2.
Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
User Manual114Network Settings
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR WiFi 6 AX1800 and is the answer not in the manual?

NETGEAR WiFi 6 AX1800 Specifications

General IconGeneral
WiFi TechnologyWiFi 6 (802.11ax)
Maximum WiFi Speed1.8Gbps
BandsDual-band
Ethernet Ports1 x Gigabit Ethernet
MU-MIMOYes
BeamformingYes
SecurityWPA3
OFDMAYes
Wireless Speed600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
AntennaInternal antennas
Power SourcePower adapter

Related product manuals