NETGEAR WiFi 6 AX1800 User Manual

the WAX204 AP, WiFi router, or AP that is connected to the modem. To specify a
static IP address for the AP that functions as the WiFi bridge, do the following:
a. Clear the Get IP Address Dynamically check box.
The Get DNS Server Address Dynamically check box is automatically cleared.
b.
Enter all static IP address information and, if applicable, static DNS address
information.
12. Click the Apply button.
Your settings are saved. The AP restarts with a new IP address.
13. To reconnect, close your browser, relaunch it, and log in to the AP by entering
http://www.routerlogin.net.
Change the CTS/RTS threshold and
preamble mode for a radio
For most WiFi networks, the CTS/RTS threshold and preamble mode work fine and we
recommend that you do not change the settings. (In general, these settings are intended
for WiFi testing.)
CAUTION: Do not change these settings unless directed by NETGEAR support or
unless you are sure what the consequences are. Incorrect settings might disable the
WiFi function of a radio unexpectedly.
IMPORTANT: If the smart connect feature is enabled (which it is by default), the CTS/RTS
threshold and preamble mode apply to both radios. That means that you cannot change
the CTS/RTS threshold and preamble mode for each radio individually.
To change the CTS/RTS threshold and preamble mode for a radio:
1.
Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2.
Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
User Manual209Advanced WiFi and Radio
Features
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter