6.
Clear the Enable WMM (Wi-Fi multimedia) settings check box for the radio to
disable WWM, or clear both check boxes for both radios.
7. Click the Apply button.
Your settings are saved. The radio or radios restart and WiFi clients might need to
reconnect.
Improve network connections with Universal
Plug and Play [router mode]
Universal Plug and Play (UPnP) helps devices such as Internet appliances and computers
access the network and connect to other devices as needed. UPnP devices can
automatically discover the services from other registered UPnP devices on the network.
If the AP is in router mode and you use applications such as multiplayer gaming,
peer-to-peer connections, or real-time communications such as instant messaging or
remote assistance, keep UPnP enabled, which it is by default in router mode.
To manage Universal Plug and Play:
1.
Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2.
Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > UPnP.
The UPnP page displays.
User Manual110Optimize Performance
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
Need help?
General
