Remove a port forwarding rule [router mode]
If the AP is in router mode, you can remove a port forwarding rule that you no longer
need.
To remove a port forwarding rule:
1.
Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2.
Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5. Make sure that the Port Forwarding radio button is selected.
6.
In the table, select the radio button for the service or application name.
7. Click the Delete Service button.
The rule is removed from the table.
A default rule remains available in the Service Name menu. A custom rule is removed.
If you want to reinstate the custom rule, you must redefine it.
User Manual216Port Forwarding and Port
Triggering [Router Mode]
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
Need help?
General
