5
Basic WiFi and Radio Features
This chapter describes how you can manage the basic WiFi and radio settings of the
AP. For information about the advanced WiFi and radio settings, see Advanced WiFi
and Radio Features on page 190.
Tip: If you want to change the WiFi network settings, use a wired connection to avoid
being disconnected when the new WiFi settings take effect.
The chapter includes the following sections:
• Set up or change an open or secure WiFi network
• Configure WPA and WPA2 Enterprise WiFi security with a RADIUS server
• Enable or disable a WiFi network
• Hide or broadcast the SSID for a WiFi network
• Manage client isolation for clients of the Wireless 2 or Wireless 3 network
• Manage access to LAN ports for clients of the Wireless 2 or Wireless 3 network
• Manage SSID isolation for all WiFi networks
• Enable or disable a WiFi radio
• Use WPS to connect to the WiFi network
Note: In this chapter, we refer to the access point as the AP.
63
To Next Page
Loading...
Need help?
General
