12.
In the Password field, enter the password for authentication with the VPN server.
13. Click the Connect button.
Your settings are saved and the AP attempts to connect to the VPN server.
When the AP is connected to the VPN server, the Connect button changes into the
Disconnect button, allowing you to terminate the VPN connection.
The Status field at the top of the page displays the status of the VPN connection,
which you can be one of the following:
•
Connecting. The AP is attempting to connect to the VPN server.
•
Connected. The AP is connected to the VPN server.
•
Disconnected. The AP is connected to the VPN server.
•
Error. The connection to the VPN server failed.
If you experience difficulty in establishing a VPN connection, click the Show Logs
link and see if any log messages provide helpful information. For more information
about the logs, see Logs on page 147.
Disconnect the AP from the VPN server
[router mode]
To disconnect the router from the VPN server and terminate the VPN connection:
1.
Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2.
Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select BASIC > VPN Client.
The VPN Client page displays.
5. Click the Disconnect button.
User Manual178VPN Client [Router Mode]
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
Need help?
General
