NETGEAR WiFi 6 AX1800 User Manual

6. Select or clear the Enable SSID Broadcast check box.
When you select the check box, the WiFi network broadcasts the SSID.
When you clear the check box, the WiFi network hides the SSID.
7. Click the Apply button.
Your settings are saved.
Manage client isolation for clients of the
Wireless 2 or Wireless 3 network
If client isolation is disabled for a WiFi network (SSID) on the AP, WiFi clients that are
associated with that WiFi network can communicate with each other. This is the default
setting for the Wireless 1 network and you cannot change the setting for the Wireless
1 network.
As an added security measure for the Wireless 2 and Wireless 3 networks, you can
enable client isolation for all WiFi clients on the same WiFi network, preventing
communication between WiFi clients that are associated with that WiFi network. Those
WiFi clients can still communicate with each other over the Internet. This is the default
setting for the Wireless 2 and Wireless 3 networks.
To manage client isolation for the Wireless 2 or Wireless 3 network:
1.
Connect your computer or mobile device to the AP in one of the following ways
•
Connect directly to the AP’s WiFi network or LAN. (Applies to the AP in either
operation mode.)
•
Connect to the same network that the AP is connected to. (Applies only if the AP
is operating in AP mode.)
2.
Launch a web browser and enter http://www.routerlogin.net in the address field.
Instead, if you are connected to same network as the AP, enter the LAN IP address
that is assigned to the AP. For information about finding the IP address, see Find the
IP address of the AP when you cannot use routerlogin.net on page 32.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
User Manual72Basic WiFi and Radio Features
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter