Here are some sample entries:
•
Specify XXX to block http://www.badstuff.com/xxx.html.
•
Specify the domain suffix (for example, .com) if you want to block only sites with
a domain suffix such as .com. In such a situation, sites with domain suffixes such
as .edu and .gov are still allowed.
•
Enter a period (.) to block all Internet browsing access.
7. Click the Add Keyword button.
The keyword or domain is added to the Block sites containing these keywords
or domain names field (which is also referred to as the blocked list).
8. To add more keywords or domains, repeat the previous two steps.
The keyword list supports up to 32 entries.
9. Click the Apply button.
Your settings are saved.
Remove a keyword or domain from the blocked list [router
mode]
If you no longer need a keyword or domain on the blocked list, you can remove the
keyword or domain.
To remove a keyword or domain from the blocked list:
1.
Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2.
Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Block Sites.
The Block Sites page displays.
User Manual93Security, Firewall, and Access
Rules
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
Need help?
General
