5. Select the Use a Dynamic DNS Service check box.
6. From the Service Provider menu, select NETGEAR.
7. Select the No radio button.
8.
In the Host Name field, enter the name that you want to use for your URL.
The host name is also called the domain name. Your free URL includes the host name
that you specify and ends with mynetgear.com. For example, enter
MyName.mynetgear.com.
9.
In the Email field, enter the email address that you want to use for your account.
10.
In the Password field, enter the password that you want to use for your account.
The password must contain between 6 and 32 characters.
11. Click the Register button.
12.
Follow the onscreen instructions to register for your NETGEAR Dynamic DNS service.
Use an existing Dynamic DNS account
[router mode]
If you already created a Dynamic DNS (DDNS) account with NETGEAR, No-IP, or Dyn,
you can set up the AP to use your account.
To set up DDNS if you already created an account:
1.
Launch a web browser from a computer or mobile device that is connected to a WiFi
network or LAN port on the AP.
2.
Enter http://www.routerlogin.net in the address field.
A login window displays.
If your browser displays a security warning, dismiss the warning. For more information,
see Find the IP address of the AP when you cannot use routerlogin.net on page 32.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5. Select the Use a Dynamic DNS Service check box.
User Manual172Dynamic DNS [Router Mode]
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204
To Next Page
Loading...
Need help?
General
