NETGEAR WiFi 6 AX1800 User Manual

•
5 GHz radio. To change the settings for the 5 GHz radio, scroll down to the
Advanced Wireless Settings (5 GHz 802.11a/n/ac/ax) section.
Note: If the smart connect feature is enabled (which it is by default), the page
presents a single option in the Advanced Wireless Settings (2.4 GHz/b/g/n/ax & 5
GHz 802.11a/n/ac/ax) section. In that situation, setting up or changing a WiFi schedule
applies to both radios simultaneously. If the smart connect feature is disabled, you
can set up or change a WiFi schedule for each radio individually.
6. Click the Add a new period button.
The settings to turn off the WiFi signal display.
7. Use the menus, radio buttons, and check boxes to set up a period during which you
want to turn off the WiFi signal for the selected radio and specify whether the schedule
is recurrent.
The start time and end time cannot be identical, even if they fall on different days.
For example, if you start the schedule at 12:00 midnight, you cannot end it on another
day at 12:00 midnight but you can end it at 11:30 p.m. or 12:30 a.m.
8. Click the Apply button.
Your settings are saved, the Advanced Wireless Settings page displays again, and
the new schedule shows in the table for the selected radio.
9.
To enable a schedule immediately, do the following above the table,
a.
In the table, select the radio button for the schedule.
If the table includes a single schedule only, the radio button for the schedule is
already selected.
The radio button for the schedule also lets you select the schedule if you want
to change (edit) or delete it.
b.
Select the Turn off wireless signal by schedule check box.
10. Click the Apply button.
Your settings are saved and the schedule becomes active. The WiFi signal is turned
off according to the schedule that you added.
Enable or disable MU-MIMO
Multiuser multiple input, multiple output (MU-MIMO) improves performance when
multiple MU-MIMO-capable WiFi clients transfer data at the same time. WiFi clients
must support MU-MIMO. This feature is enabled by default, but you can disable it.
User Manual202Advanced WiFi and Radio
Features
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter