NETGEAR WiFi 6 AX1800 User Manual

9. In the LAN Setup section, select an IP Address Assignment radio button:
•
Use DHCP Server. This method passes more information to LAN devices but
some IPv6 systems might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
This setting specifies how the AP assigns IPv6 addresses to the devices on your home
network (the LAN).
10.
(Optional) In the LAN Setup section, select the Use This Interface ID check box and
specify the interface ID to be used for the IPv6 address of the AP’s LAN interface.
If you do not specify an ID here, the AP generates one automatically from its MAC
address.
11. Select an IPv6 Filtering radio button:
•
Secured. In secured mode, which is the default mode, the router inspects both
TCP and UDP packets.
• Open. In open mode, the router inspects UDP packets only.
12. Click the Apply button.
Your settings are saved.
User Manual62Manually Set Up Internet
Settings [Router Mode]
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter