NETGEAR WiFi 6 AX1800 User Manual

If your browser displays a security warning, dismiss the warning. For more information,
see Dismiss a browser security warning on page 38.
3. Enter the AP local device password.
The local device password is the one that you specified. The local device password
is case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The Access Control page displays.
5.
Click the View list of blocked devices not currently connected to the network
link.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the network.
6.
To manually add a device to the blocked list, do the following:
a. Click the Add button.
The Add Blocked Device page displays.
b.
Enter the MAC address and device name for the device that you want to block.
c. Click the Apply button.
The device is added to the blocked list. The Access Control page displays again.
7.
To remove a device from the blocked list, do the following:
a.
Select the check box for the device.
b.
Click the Remove from the list button.
The device is removed from the blocked list.
8.
To change the MAC address or name for a device on the blocked list, do the
following:
a.
Select the check box for the device.
b. Click the Edit button.
The Edited Blocked Device page displays.
c. Change the MAC address, device name, or both.
d. Click the Apply button.
The Access Control page displays again.
9. Click the Apply button.
User Manual91Security, Firewall, and Access
Rules
WiFi 6 AX1800 Dual Band Wireless Access Point WAX204

NETGEAR WiFi 6 AX1800 Specifications

General

WiFi Technology	WiFi 6 (802.11ax)
Maximum WiFi Speed	1.8Gbps
Bands	Dual-band
Ethernet Ports	1 x Gigabit Ethernet
MU-MIMO	Yes
Beamforming	Yes
Security	WPA3
OFDMA	Yes
Wireless Speed	600 Mbps (2.4 GHz) + 1200 Mbps (5 GHz)
Antenna	Internal antennas
Power Source	Power adapter