Contents
vi ZM2371/ZM2372
4. ADVANCED OPERATIONS ·································································· 4-1
4.1 Restricting the Variation of Measured Values (Averaging) ····································· 4-2
4.2 Displaying the Deviation from the Reference Value ·············································· 4-3
4.3 Sorting the Part (Comparator) ········································································· 4-6
4.4 Connecting to the Part Handler (Handler Interface) ············································ 4-15
4.5 Changing the Contents Displayed on the Second line of Measurement Screen
(Auxiliary Display) ······················································································· 4-22
4.6 Saving/Recalling the Setting and Correction Value into the Memory ······················ 4-24
4.7 Setting the Contact Check ············································································ 4-26
4.8 Using the DC Bias ······················································································ 4-30
4.9 Disabling the Key-Operation of Panel ····························································· 4-35
4.10 Initializing of All Settings ············································································· 4-36
4.11 Self-Diagnosis ·························································································· 4-39
4.12 Checking the Version ················································································· 4-40
5. REMOTE CONTROL ·········································································· 5-1
5.1 Preparations Before Use ················································································ 5-2
5.1.1 Remote Control Interface Selection ····························································· 5-2
5.1.2 Outline of USB ························································································ 5-3
5.1.2.1 Preparation of Controller ············································································· 5-3
5.1.2.2 Preparation of ZM2371 / ZM2372 ································································· 5-4
5.1.2.3 USB Device Identification ············································································ 5-4
5.1.3 Outline of RS-232 ···················································································· 5-5
5.1.3.1 Preparation of Controller ············································································· 5-5
5.1.3.2 Preparation of ZM2371 / ZM2372 ································································· 5-5
5.1.3.3 Connection ······························································································ 5-8
5.1.3.4 Difference between RS-232 and USB/GPIB, and Precautions ···························· 5-9
5.1.4 Outline of GPIB ····················································································· 5-10
5.1.4.1 Preparation of Controller ··········································································· 5-10
5.1.4.2 Preparation of ZM2372 ············································································· 5-10
5.1.4.3 Precautions on Use of GPIB ······································································ 5-10
5.1.4.4 Basic Specifications of GPIB ····································································· 5-11
5.1.5 Precautions on Communication ································································ 5-12
5.2 Switching between Remote State and Local State ············································· 5-13
5.3 Response to Interface Message ···································································· 5-14
5.4 Command List ··························································································· 5-15
5.5 Command Tree ·························································································· 5-19
5.6 Command Explanation ················································································ 5-21
5.6.1 Summary of Terms ················································································· 5-21
5.6.1.1 Subsystem Commands ············································································ 5-21
5.6.1.2 Path Separator ······················································································· 5-21
5.6.1.3 Keywords Simplification ············································································ 5-22
5.6.1.4 Implicit Keywords ···················································································· 5-22
5.6.2 Overlap Commands and Sequential Commands ·········································· 5-22
5.6.3 Command Detailed Explanations ······························································ 5-23
5.6.3.1 Common Commands ··············································································· 5-24
5.6.3.2 Subsystem Commands ············································································ 5-28
To Next Page
Loading...
