NF ZM2371 - Page 152

5.6 Command Explanation
5-25 ZM2371/ZM2372
*IDN?
Description: Queries the model name etc.
Response: {"<name of manufacturer>，<model name>，<serial number>，<firmware
version>"} format SRD
Query example: *IDN?
Response example: "NF Corporation,ZM2371,9033552,Ver1.00"
*OPC
*OPC?
Description: Confirms that the execution of all the preceding commands is
completed.
Setting example: *OPC
Makes setting so that OPC bit of standard event status register is set to
“1” when the execution of all the preceding commands is completed. By
monitoring the status, the completion of command execution can be
known.
Response: 1
1 is returned when the execution of all the preceding commands is
completed.
Query example: *OPC?
Response example: 1
The execution of all commands is completed.
Remarks: The OPC bit of standard event status register is not cleared by *OPC?.
To clear it, use the device clear, *CLS, or *RST command.
*OPT?
Description: Queries options that are furnished in the device.
Response: {numeric value, format NR1, range {0|<option 1>[,<option 2>][,<option
3>] • • • } }
Format of each field
0 No option is furnished.
Others At present, no option is provided.
Query example: *OPT?
Response example: +0
No option is furnished.