i ZM2371/ZM2372
Preface
Thank you very much for purchasing our “ZM2371/ZM2372 LCR METER”.
To ensure safe and proper use of this electric equipment, please read first
“Safety Precautions” on the following pages.
Caution Symbols Used in This Manual
The following caution symbols are used in this manual. Be sure to observe these caution
symbols and their contents to ensure the safety of the user and avoid damage to the equipment.
Equipment handling could result in death or serious injury. This symbol contains
information to avoid such risk.
Equipment handling could result in minor or moderate injury or property damage.
This symbol contains information to avoid such risk.
The scope of this Manual
This manual describes the ZM2371/ZM2372 with the firmware version 1.30 or more and CE
Marking.
The early products without CE Marking do not meet the CE Marking (EMC and others). Please
make sure the CE marking on the rear panel.
The ZM2371/ZM2372 with the version 1.00, 1.10, or 1.20 has no function fixing the output
impedance to 100 , and the minimum output impedance setting is either 5 or 25 .
Please watch the version that appears at the power-on.
To Next Page
Loading...
