Chapter 7 Assembly of the Devices
125
Device Description Model Remarks
Condenser
module
for NAMC
microscopy
NAMC module TC-C-MN series For NAMC condensers
NAMC LWD module TC-C-MNL series For LWD condensers
Motorized
shutter
Motorized shutter NI-SH-E Diascopic illumination
Mountable only when a precentered
lamphouse is used.
Mounted by Nikon personnel.
Controller for motorized shutter NI-SH-CON
Motorized shutter cable long S-TI2-SHCLL
For connecting the motorized shutter
controller
Motorized shutter cable long NI-SHCL
For connecting the motorized shutter
controller
Motorized shutter adapter for
dia-illumination
NI-SHADI
Motorized shutter adapter for
inverted epi-fl
TI-SHAEP-I
Epi-fluorescence
attachment
Fixed main branch TI2-LA-BF
A branch used for connecting the
EPI-FL module to the microscope
Main branch TI2-LA-BM
A branch used for connecting the
EPI-FL module to the microscope
Sub branch TI2-LA-BS
In combination with the TI2-LA-BM
main branch, two EPI-FL modules
can be attached.
Switching mirror TI-LA-SWM
For switching the optical path of the
TI2-LA-BM main branch
Select either 50:50 or 100:0 (total
reflection).
Stage-up lens TI-LA-SUL
For the lower-tier main branch when
a stage-up kit is used
For details, contact your local Nikon
representative.
EPI-FL module TI2-LA-FL-2
Required for a combination of each
branch and an LED light source
Light source for
episcopic
illumination
Fluorescence LED illumination
system
D-LEDI Fluorescence LED light source
Episcopic field
diaphragm
slider
Circular field stop slider TI2-F-FSC
Square field stop slider TI2-F-FSS
Rectangle field stop slider TI2-F-FSR Aspect ratio: 2:3
Stage-up Stage-up kit for Ti2-A/U TI2-LA-SU
For details, contact your local Nikon
representative.
Port Back port unit TI-BPU Port for the second camera device
Side port adapter
Supplied with the microscope main
body (x 2)
C mount adapter with centering tool TI2-P-CCA
To Next Page
Loading...
Need help?
General
