NMC-WOLLARD 100 - Figure 1-8: Viewing Active Warnings

NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M100 Tow Tractor Manual No. 46052
PAGE 16
CHAPTER 5 MANUFACTURER’S INFORMATION
9
NexSysLink
®
2" Stand-Alone CAN Display Operation Manual  SAE J1939
© 2011 Beede Electrical Instrument Co., Inc.
• Viewing Active Warnings
If a warning information screen is cleared after it initially appears and the warning is still active, users
can view all the active warning information screens by using the Warnings Active function of the Main
Menu, Main Menu-Warnings Active�
Figure 1-8: Viewing Active Warnings
Faults Stored
Warnings Active
Eng Oil Pressure
Warning SPN 100
Faults Stored
Warnings Active
Faults Active
Maintenance Hours
Engine Hours
1049.3
Pressing the Enter switch with any of the active
warnings detail screens visible returns the selection
arrow cursor next to the Warnings Active option
within the Main Menu�
The warning detail screen appears if at least one
warning is present� If multiple warnings are present,
the menu scroll down icon appears�
Scroll down to view other warnings or press the Enter
switch to return to the Warnings Active option of the
Main Menu�
Press the Enter switch with the selection arrow cursor
next to the Warnings Active option to view all current
system warnings�
First Main Menu screen appears with selection
arrow cursor next to Maintenance Hours�
Scroll down to place the selection arrow cursor
next to the Warnings Active option�
With a CAN parameter displayed, press and
hold the Enter switch to bring up the Main Menu�
Engine Hours parameter shown as an example only�
CAN DISPLAY MANUAL
NOVEMBER 02, 2015