NMC-WOLLARD 100 - Figure 1-20: Setup Menu Functions

NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M100 Tow Tractor Manual No. 46052
PAGE 28
CHAPTER 5 MANUFACTURER’S INFORMATION
21
NexSysLink
®
2" Stand-Alone CAN Display Operation Manual  SAE J1939
© 2011 Beede Electrical Instrument Co., Inc.
• Setup Menu
The Setup Menu contains all the functions necessary to congure the instrument to satisfy user
preferences and application requirements� This section of the manual describes those functions�
Figure 1-20: Setup Menu Functions
Units
Backlight
Informaon
Setup
Setup Menu Function List�
Backlight
Units
Popup
Display
Trip Mode
Alarm Output
Return
Exit
The Setup menu appears with the selection arrow
cursor next to the Backlight option�
Scroll down to view all Setup menu functions�
From the Main Menu, scroll to place the selection
arrow cursor next to the Setup option�
Press the Enter switch to view Setup functions�
Setup Menu function summary:
Backlight - Sets intensity of instrument illumination�
Units - Sets display units to English or SI-Metric�
Popup - Activates notication screen for Faults, Warnings and Alarms�
Display - Sets either 1 or 2 parameter display mode, LCD contrast and positive or negative image mode�
Trip Mode - Determines if maintenance hours or trip miles displays as the rst item of the Main Menu�
Alarm Output - Turns o (mutes) the output for audible devices�
Return - Brings users back to Main Menu-Setup�
Exit - Leaves the menu to show the last displayed CAN parameter�
CAN DISPLAY MANUAL
NOVEMBER 02, 2015