NMC-WOLLARD 100 - Figure 1-22: Setting Units

NMC-WOLLARD 2021Truax Blvd., Eau Claire, WI 54703, Phone (715) 835-3151, Fax (715) 835-6625
M100 Tow Tractor Manual No. 46052
PAGE 30
CHAPTER 5 MANUFACTURER’S INFORMATION
23
NexSysLink
®
2" Stand-Alone CAN Display Operation Manual  SAE J1939
© 2011 Beede Electrical Instrument Co., Inc.
• Setting Units
Users may select to display CAN parameters in either English or SI-Metric units�
Figure 1-22: Setting Units
Exit
Popup
Units-Metric
Popup
Units-English
Units
Backlight
Scroll down to the Exit option and press the Enter switch or
wait 30 seconds for the last displayed CAN parameter to appear�
Pressing the Enter switch toggles the units to Metric�
Press the Enter switch to toggle the units back to English�
When the selection arrow cursor is placed next to the
Units option, the name changes to Units and the current
setting, i�e�, Units-English or Units-Metric�
Pressing the Enter switch toggles between the two settings�
The setting is automatically saved once changed�
From the Setup menu, scroll to place the selection arrow
cursor next to the Units option, Main Menu-Setup-Units�
CAN DISPLAY MANUAL
NOVEMBER 02, 2015