Nokia 7705 - Page 209

Quality of Service Guide Network QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 209
===============================================================================
Dot1p Application Values
===============================================================================
Application Dot1p Value Default Dot1p Value
-------------------------------------------------------------------------------
arp 5 7
isis none 7
===============================================================================
A:ALU-1#
dscp-map
Syntax dscp-map [dscp-name]
Context show>router>sgt-qos
Description This command displays the DSCP-to-FC mappings.
Parameters dscp-name — the specified DSCP name. Table 31 lists the valid DSCP names.
Output The following output is an example of DSCP-to-FC mapping information, and Table 37
describes the fields.
Table 36 Application QoS Output Fields
Label Description
Application The DSCP or dot1p application
DSCP Value The DSCP name or value assigned to the
application; if you assign a value to the
application (0 to 63), the DSCP name that
maps to the value is displayed
Default DSCP Value The default DSCP value
Dot1p Value The dot1p priority assigned to the
application (applies only to ARP and
IS-IS)
Default Dot1p Value The default dot1p value