Service Egress and Ingress QoS Policies
314
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
auto-expedite — the system auto-defines the way the queue is serviced by the
hardware. When auto-expedite is defined on the queue, the queue is treated in an
expedited manner when all forwarding classes mapped to the queue are configured
as expedited types nc, ef, h1, or h2. When a single non-expedited forwarding class
is mapped to the queue (be, af, l1, and l2) the queue automatically falls back to non-
expedited status.
Values expedite, best-effort, auto-expedite
Default auto-expedite
queue-mode — this optional parameter specifies the queue mode. The only valid value
is priority-mode, which means that the queue is capable of handling traffic with two
distinct priorities in different ways. These priorities are assigned by the stages
preceding the queuing framework in the system. In priority mode, the queue does not
have the functionality to support the profiled traffic. However, a queue in profile mode
should be capable of supporting the different priorities of traffic.
create — keyword used to create a sap-ingress queue context
To Next Page
Loading...
