Service Egress and Ingress QoS Policies
316
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
The no form of the command disables the color profile mode of operation on all SAPs to
which this ingress QoS policy is applied.
Default no de-1-out-profile
multicast-queue
Syntax multicast-queue queue-id
no multicast-queue
Context config>qos>sap-ingress>fc
Description This command maps the multicast forwarding type queue to the fc fc-name. The specified
queue-id must already have been created within the policy before the mapping can be made.
Once the forwarding class mapping is executed, all multicast traffic on a SAP using this policy
will be forwarded using the queue-id.
The no form of the command sets the multicast forwarding type queue-id back to the default
of no mapping to an FC.
Default no multicast-queue
Parameters queue-id — an existing queue defined in the config>qos>sap-ingress context.
Values 1 to 8
queue
Syntax queue queue-id
no queue
Context config>qos>sap-ingress>fc
Description This command overrides the default forwarding type queue mapping for fc fc-name.
The no form of this command sets the queue-id back to the default queue for the forwarding
class (queue 1).
Parameters queue-id — an existing queue defined in the config>qos>sap-ingress context
Values 1 to 8
Default 1
To Next Page
Loading...
