QoS Shapers and Shaper QoS Policies
456
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
Parameters cir-rate — the CIR for the shaper group
Values 0 to 100000000, or max (kbps)
pir-rate — the PIR for the shaper group
Values 1 to 100000000, or max (kbps)
unshaped-sap-shaper-group
Syntax [no] unshaped-sap-shaper-group shaper-group-name
Context config>qos>shaper-policy
Description This command assigns a shaper group to the unshaped SAPs assigned to the shaper policy.
An unshaped shaper group is a dual-rate aggregate shaper used to arbitrate unshaped traffic
for SAPs (access).
There can be only one unshaped SAP shaper group per shaper policy. The unshaped SAP
shaper group must already exist within the shaper policy before it can be chosen for the
unshaped-sap-shaper-group.
The no form of this command removes the configured unshaped-sap-shaper-group.
Default shaper-group “default”
Parameters shaper-group-name — the name of the unshaped SAP shaper group. To access the
default shaper group, enter “default”.
To Next Page
Loading...
