Quality of Service Guide Security Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 473
11.4.2.1.1 Security Queue QoS Policy Commands
security-queue
Syntax security-queue policy-id [create]
no security-queue policy-id
Context config>qos
Description This command configures a security queue policy for traffic being extracted from the datapath
to the CSM for firewall processing. When a security queue policy is created, two queues are
created automatically for the extracted traffic: queue 1 for best-effort traffic and queue 2 for
expedited traffic. The queue number and type for these two queues is not configurable.
The no form of this command removes the security queue policy.
Default n/a
Parameters policy-id — the number of the policy being referenced. Policy 1 is reserved for the default
security queue policy; it cannot be modified.
Values 1 to 65535
create — keyword used to create a security queue policy
description
Syntax description description-string
no description
Context config>qos>security-queue
Description This command configures a description for the security queue policy being referenced.
The no form of this command removes the description.
Default n/a
Parameters description-string — a text string describing the entity. Allowed values are any string up
to 80 characters long composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed
within double quotes.
To Next Page
Loading...
