Nord Drivesystems B 1050 Series User Manual

Industrial gear units – Operating and Assembly Instructions
104 B 1050 en-1819
Pos: 23 4 /Anlei tung en/G etrieb e/7. A nhang /Betri ebss törung en_0 1 [B105 0, B2050 ] @ 31\mod_1553081366771_388.docx @ 2515892 @ 2 @ 1
7.6 Troubleshooting
Pos: 23 5 /Anlei tung en/G etrieb e/7. A nhang /Betri ebss törung en_0 2 [B105 0] @ 32\mod_1553081404077_388.docx @ 2515966 @ @ 1
NOTICE!
Gear unit damage
Failure to comply with this will result in damage to the gear unit.
• Shut down the gear unit immediately should any faults occur.
Pos: 23 6 /Anlei tung en/G etrieb e/7. A nhang /Betri ebss törung en_0 3 [B105 0, B2050 ] @ 32\mod_1553081418907_388.docx @ 2516003 @ @ 1
WARNING
Injury to persons
There is a slipping hazard in case of leaks.
• Clean the soiled floor and machine components before starting troubleshooting.
WARNING
Injury to persons
Risk of injury due to rapidly rotating and hot machine components.
• Troubleshooting must only be performed when gear units are at a standstill and have cooled down. The drive
must be isolated and secured to prevent accidental start-up.
Pos: 23 7 /Allgemein/Allgemeingültige Module/---------Seitenu mbruc h komp akt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1

Nord Drivesystems B 1050 Series Specifications

General

Brand	Nord Drivesystems
Model	B 1050 Series
Category	Engine
Language	English