Nord Drivesystems B 1050 Series User Manual

4 Commissioning
B 1050 en-1819 67
4.11.2 Optional
Checklist
Subject of test
Date
checked:
Information
see Section
Option R, WX, FAN:
Is the direction of rotation specified and checked?
4.9
Option D and ED:
Is the torque support correctly fitted?
3.18
Option AS, FAN:
Are contact guards fitted to rotating components?
3.21
Option FAN, CS2:
Is an adequate supply of air ensured?
4.4
Option CS1, CC:
Is the cooling water connected to the cooling unit or the cooling
coil and open?
4.5
Option CS1, CS2:
Is the cooling unit connected to the gear unit?
4.6
Option: LC, LCX:
Has the pressure switch been functionally connected?
4.3
Option PT100:
Has the temperature monitor been functionally connected?
4.8
Option AS:
Has the shrink disk connection been checked for slippage?
3.10.2
Brake option:
Is the brake correctly adjusted?
3.20
Option MT:
Is the belt correctly tensioned?
3.13
Option WX:
Has the speed monitor been functionally connected?
4.9
Table 11: Optional checklist for commissioning
Pos: 15 0 /Anlei tung en/G etrieb e/5. In spekti on un d Wartu ng/5. Ins pekti on und Wartung @ 23\mod_1531828817835_388.docx @ 2434012 @ 1 @ 1

Nord Drivesystems B 1050 Series Specifications

General

Brand	Nord Drivesystems
Model	B 1050 Series
Category	Engine
Language	English