1 Notes
B 1050 en-1819 11
Pos: 20 /Anlei tunge n/Ge triebe /1. Hin weis e/Bes timmu ngsg emäße Ver wend ung [B 1050] @ 17 \mod_1492069354889_388.docx @ 2340259 @ 2 @ 1
1.4 Intended use
These gear units generate a rotational movement and are intended for use in commercial systems.
The gear unit must only be used according to the information in the technical documentation from
Getriebebau NORD.
Commissioning (start of proper operation) is prohibited until it has been established that the machine
complies with the local laws and directives. The EMC Directive 2004/108/EC and the Machinery
Directive 2006/42/EC in their currently valid scope of application must be complied with in particular.
DANGER
Explosion hazard
Serious injury and material damage due to explosion are possible.
• Use in explosion hazard areas is prohibited.
WARNING
Injury to persons
Appropriate safety measures must be taken in the case of applications in which failure of a gear unit or geared
motor may cause a hazard to persons.
• Safeguard a wide area around the hazard zone.
Material damage and personal injury
If the gear unit is not used as designed, this may cause damage to the gear unit or the premature failure of
components. Personal injury as a result of this cannot be ruled out.
• Strict compliance with the technical data on the type plate is essential. The documentation must be observed.
Pos: 21 /Allge mein /All ge meing ül tig e M odul e/---------Sei tenum bruch ko mpakt --------- @ 13\mod_1476369695906_0.docx @ 2265495 @ @ 1
To Next Page
Loading...
Need help?
General
