Nordson UltimusPlus Series User Manual

Activating a Program
The dispenser includes 16 typical dispense programs in the
Program Library. You can make any of these programs the
active program.
There are two ways to activate a program:
• By pressing the program number box in the Program
Library
• By pressing a dark gray program number box present on
any screen other than the Program Library screen
NOTE: You can also edit any of these programs to create a
new program. Refer to “Editing a Program” on page31 for
details.
To Activate a Program through the Program Library
1. Press Programs . The Program Library screen opens.
2. Press the program number (not the program name) to
activate the program.
3. Press Home to return to the Home screen.
The currently active program number appears next to the
Programs icon, and the Time, Pressure, Vacuum, Run
Limit, MultiShot, and Steady Mode values update to show
the program settings.
Location of the program number on
the Home screen
Operation (continued)
To Activate a Program by Pressing the Program
Number Box
Press any dark gray program number box to activate that
program.
Example of a dark gray program number box
(Program Details screen shown)
UltimusPlus Series Dispensers
30 www.nordsonefd.com info@nordsonefd.com +1-401-431-7000 Sales and service of Nordson EFD dispensing systems are available worldwide.

Nordson UltimusPlus Series Specifications

General

Brand	Nordson
Model	UltimusPlus Series
Category	Dispenser
Language	English