100 Hardware installation
Signaling Server types are supported.
•
ISP1100
• CP PM signaling server
•
COTS IBM X306m
• COTS HP DL320-G4
For details about Signaling Server hardware installation, see Signaling
Server Installation and Commissioning (NN43001-312) .
PC (DAP controller)
Minimum specifications for the PC are as follows.
•
2.4 GHz CPU speed
• 256 MB RAM
•
CD-ROM drive
•
1GB free hard disk space
DECT Access Points
Two models of DECT Access Points are currently available for the Nortel
SIP DECT system, C4710 and C4710E. C4710E can use external
antenna.
•
C4710 DECT Access Point:
— PEC: NTCW26AAE5
—
CPC: N0162007
•
C4710E DECT Access Point:
— PEC: NTCW26BAE5
— CPC: N0162008
ATTENTION
Only the G711 codec is supported on the C4710 and C4710E DAP models.
Ensure that the G711 codec is available in your system and that the G711 codec
can be used for any call involving a DECT handset.
It is not possible to make calls between the Nortel IP Softphone 2050 and DECT
handsets when the following check box in the Audio settings of the softphone is
selected: I use a modem to connect to the network. This setting forces the
Nortel IP Softphone 2050 to use the G729 codec for all calls.
When using Multimedia PC Client, ensure that you select Medium Speed or
High Speed in the Multimedia PC Client Connection preferences if you plan to
make calls between DECT handsets and Multimedia PC Clients.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
