Nortel CS 1000 User Manual

136 System configuration
• D-Channel: 5
• Route: 6
• Access Code: 9
•
Location code: 442
• SIP Route ACOD: 6
• SIP domain name: mera.ru
• Signaling Server hostname: SS_Node55_ldr
Configuration of settings using IP DECT Configurator
The IP DECT Configurator is a tool for creating configuration files for the
DAP controller and DAPs. The IP DECT Configurator is installed and
launches automatically with the installation of the DAP controller software.
The IP DECT Configurator can also be launched using the shortcut to the
IP DECT Configurator tool found under the Start menu at Programs > DAP
controller > DAP Applications.
For more information about IP DECT configurator installation, see
Procedure 45 “Installing the DAP Controller” (page 130).
Use the steps in the following procedures to configure the settings in the IP
DECT Configurator.
• Procedure 46 “Launching the IP DECT Configurator” (page 137)
•
Procedure 47 “Adding a new system using the IP DECT Configurator”
(page 138)
•
Procedure 48 “Configuring IP Settings” (page 139)
• Procedure 49 “Configuring Network Settings” (page 140)
•
Procedure 51 “Configuring SIP Settings” (page 141)
•
Procedure 52 “Configuring DECT Settings” (page 143)
• Procedure 53 “Configuring other settings—Performance/Email
Settings” (page 145)
• Procedure 54 “Configuring other settings—Customer Information
settings” (page 148)
• Procedure 55 “Saving the system” (page 149)
• Procedure 56 “Enabling or re-enabling the DAPs” (page 150)
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.

Nortel CS 1000 Specifications

General

Brand	Nortel
Model	CS 1000
Category	Server
Language	English