Simple SIP DECT configuration 141
2 Select the network card connected to the SIP DECT system.
3 Select the check box next to Run TFTP server on this PC and
select the following.
• Windows TFTP server on this PC if you use an MS
Windows TFTP server.
OR
•
3com TFTP server on this PC if you use a built-in TFTP
server.
4 Configure the DHCP server.
• If you use an MS Windows DHCP server, click Apply.
OR
• If you use a built-in DHCP server, see “Built-in DHCP server”
(page 124).
ATTENTION
If you plan to create a configuration without DHCP and TFTP servers,
see “Configuration without DHCP or TFTP” (page 126).
--End--
Procedure 50
Configuring System Configuration Settings
Step Action
1 In the Settings section, click System Configuration.
2 Select Simple configuration for System configuration and
click Apply.
If you need to configure Routed Head Quarter, see “Routed
Head Quarter configuration” (page 173).
--End--
Procedure 51
Configuring SIP Settings
Step Action
1 In the Settings section, click the SIP Settings button.
The SIP Settings window appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
