Simple SIP DECT configuration 163
After the save and transfer is complete, the message Transfer
successful to all elements in the node appears.
11 Click OK.
The Transfer/Status page appears. Reboot of signaling server
and media cards is mentioned in the warning window.
--End--
Use the procedures in “NRS configuration” (page 163) to configure NRS.
NRS configuration
Use the steps in Procedure 73 “Logging on to NRS” (page 163) to log on
to the Network Routing Service manager (NRS).
Procedure 73
Logging on to NRS
Step Action
1 Log in to Network Routing Service manager and then log in to
Element manager.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
