202 System administration
You must also configure the Communication Server 1000 system to which
the SIP DECT system is connected. See “Call server configuration” (page
170) for more information.
DAP reboot histor y
Use the procedure in this section to review the log of DAP restarts. The
information available through this procedure includes development data
that is not readable. This information can be requested by the Nortel help
desk if you experience certain types of problems with your SIP DECT
system.
Procedure 104
Reviewing the DAP reboot history
Step Action
1 Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
2 Click History.
The DAP Reboot History page appears.
--End--
System archive
Use the procedure in this section to create an archive file containing
various system settings, third line maintenance data, and performance
data. This information can be requested by the Nortel help desk if you
experience certain types of problems with your SIP DECT system.
Procedure 105
Creating a system archive
Step Action
1 Open Internet Explorer and enter the following URL in the
address field: localhost/cds.
The DAP manager IP DECT page appears.
2 Click Get Archive.
The Select archive file requester appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
