Nortel CS 1000 User Manual

182 System configuration
Prompt Response Description
KEY 0 aaa yyyy, for
example,
0 SCR 5010
0 aaa yyyy = Primary UEXT DN, where:
•
aaa = MCN, MCR, SCN, or SCR
• yyyy = primary DN
1 HOT P nn yyyy,
for example,
1 HOT P 6 445001
1 hot p nn yyyy = Target DN, where:
• nn = DN length (maximum length is 32)
•
yyyy = <TSC+ subscribed DN on DAP>
Configuration of Personal Call Assistant
For multi site configuration an additional Personal Call Assistant redirects
incoming calls to the remote system. Key 0 corresponds with the DN
(MARP), for example 5010, configured on the DAP. Key 1 HOT P is the
same number with access and location codes (for UDP) to the remote
system.
PCA and UEXT are configured using LD 11.
Table 29
LD 11: Add PCA for multi site DECT Handsets (UDP)
Prompt Response Description
REQ NEW Add new extension
TYPE PCA Personal Call Assistant
CUST
n
n = customer number
TN L s c u, for
example,
960210
where L = virtual superloop, s = shelf,.
c = card, u = unit
DES
aaaa
Designator. Any description can be used.
ZONE
0
zone number
KEY 0 aaa yyyy, for
example
0 SCR 5010
0 aaa yyyy = Primary UEXT DN, where:
• aaa = MCN, MCR, SCN, or SCR
• yyyy = primary DN
1 HOT P nn yyyy,
for example
1 HOT P 8
93355010
1 hot p nn yyyy = Target DN, where:
•
nn = DN length (maximum length is 32)
• yyyy = <AC1+LOC+ subscribed DN on DAP>
Configuration of Universal Extension (UEXT) on the remote system
Universal Extension (UEXT) for multi site handset DNs, for example 5010,
must be configured on the remote system to redirect incoming calls to the
DAP. Key 0 corresponds with the multi site handset DN, configured on the
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.

Nortel CS 1000 Specifications

General

Brand	Nortel
Model	CS 1000
Category	Server
Language	English