Multi site mobility network configuration 183
DAP. Key 1 HOT P is the same number with access and location codes,
for UDP, or trunk steering code, for CDP, to access SIP trunks to the DAP,
installed on the remote system.
Table 30
LD 11: Add universal extension for multi site DECT handsets (UDP)
Prompt Response Description
REQ NEW Add new extension
TYPE UEXT Universal Extension
CUST
n
n = customer number
TNI L s c u, for
example
960110
where L = virtual superloop, s = shelf,
c = card, u = unit
UXTY SIPN UEXT subtype
DES
aaaa
Designator. Any description can be used.
KEY 0 aaa yyyy, for
example
0 SCR 5010
0 aaa yyyy = Primary UEXT DN, where:
• aaa = MCN, MCR, SCN, or SCR
•
yyyy = primary DN
1 HOT P nn yyyy,
for example
1 HOT P 8
93325010
1 hot p nn yyyy = Target DN, where:
• nn = DN length (maximum length is 32)
• yyyy = <AC1+LOC+ subscribed DN on DAP>
Table 31
LD 11: Add universal extension for multi site DECT handsets (CDP)
Prompt Response Description
REQ NEW Add new extension
TYPE UEXT Universal Extension
CUST
n
n = customer number
TN L s c u, for
example
960110
where L = virtual superloop, s = shelf
c = card, u = unit
UXTY SIPN UEXT subtype
DES
aaaa
Designator. Any description can be used.
KEY
0 aaa yyyy,
for example,
0 SCR 5010
0 aaa yyyy = Primary UEXT DN, where:
• aaa = MCN, MCR, SCN, or SCR
• yyyy = primary DN
1 HOT P nn yyyy,
for example
1 HOT P 6 335010
1 hot p nn yyyy = Target DN, where:
• nn = DN length (maximum length is 32)
• yyyy = <TSC+ subscribed DN on DAP>
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.