170 System configuration
6 Select Private level 0 regional (CDP location code) for DN
type, enter 0000-9999 for DN Prefix and 2 for Route cost.
ATTENTION
If using a Trunk Steering Code (TSC) to make calls from
Communication Server 1000 to SIP DECT, the cost of the CDP
routing entry for the Signaling Server must be higher than the cost of
the CDP routing entry for DAP Redirect Server.
7 Click Save.
--End--
Saving changes
Procedure 82
Saving changes
Step Action
1 Click Tools on the tool bar.
2 Click Database Actions on the menu list on the left.
3 Select Cut over and commit from the list.
4 Click Submit.
--End--
Call server configuration
The Call Server is configured using a command line interface with LD
overlays.
Use LD 15 to enable Personal Call Assistant before you configure the
Personal Call Assistant.
Table 20
LD 15: Enable personal call assistant
Prompt Response Description
REQ CHG
TYPE FTR FTR_DATA
CUST
n
n = customer number
...
PCA ON Enable Personal Call Assistant
...
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
