228 System maintenance
3 Select the file visadm.txt, and click Open.
4 Use the options in the menu View to analyze the synchronization
structure.
5 Optionally, use the menu options under the menu View to
trouble shoot the structure.
6 Optionally, load a location file. The location file contains a site
map with buildings and floors in which the DAPs are positioned.
Use the site map to quickly determine the position and range of a
specific DAP. You can create a Location file using the Location
Builder tool. See “Location builder tool” (page 239).
7 Optionally, load a Traffic Bearer Control (pmtbc.dat) data file.
This file contains statistics/logging on traffic bearers. To open
this file, choose Tools > Track Portable.
A file requestor appears.
8 Navigate to the directory C:\..\PM\ on the DAP controller or
manager PC, and choose the file pmtbc.dat.
The data from the TBC file is presented in a table, and the PMID
of each portable appears.
9 Navigate to the directory C:\..\PM\ on the DAP controller or
manager PC, and choose the file sm.xml.
An extra column appears in the data pane, providing the
extension number.
--End--
Export and import SIP DECT system
You can use the IP DECT Configurator to export your system to another
computer or to save the configuration as a backup copy.
After you execute an Export System, all the relevant system settings,
including all customer data, are exported to a compressed or zip file. If you
want to return to this configuration, you can easily import the compressed
file and then your entire system configuration including customer data,
such as handset subscriptions, is back again on your DAP controller or
manager PC.
Export a system
Use the steps in the next procedure to export a system configuration.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
