9
.
Product overview
Navigation
This chapter contains information about the following topics.
•
“Overview of SIP DECT” (page 9)
Overview of SIP DECT
You can use Nortel Session Initiation Protocol (SIP) Digital Enhanced
Cordless Telecommunications (DECT) to move without restriction about
your work site while conducting telephone conversations, using wireless
handsets. The Nortel SIP DECT system includes one or more DECT
access points (DAPs or basestations) connected to the TLAN.
A minimal SIP DECT system has the following five main components.
• Call Server
•
Signaling Server
• PC with DAP controller software installed
•
DAP
•
handset
Use the following four tools to configure an IP DECT system.
•
Element manager or overlay program for Call Server
• Element manager and, if required, Network Routing Service (NRS)
manager for Signaling Server
• IP DECT Configurator
• DAP manager IP DECT
Note: The IP DECT Configurator and the DAP manager IP DECT are
available as a part of the DAP controller software package.
The following software releases are required on the main system
components.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
