216 System maintenance
DAP firmware update
Use the information in this section to load updated firmware to the DAPs.
CAUTION
Risk of service loss
You must update the firmware for all DAPs in the system at
once. Ensure that all DAPs in the system are running and can
be involved in the firmware update process.
CAUTION
Service loss during restart
During the DAP firmware update, you must restart the DAPs.
When you restart the DAPs, any DECT calls that are in progress
are dropped, and the SIP DECT system is not available to
handle calls until the DAPs finish restarting.
Procedure 110
Updating the DAP firmware
Step Action
1 Launch IP DECT Configurator
2 In the IP DECT Configurator main window, click General.
3 If you have more than one DECT system configured in IP DECT
Configurator, click Modify, and select the system you want to
update.
OR
If you have only one DECT system configured, proceed to step
4.
4 In the General Settings window click Browse.
5 Browse to the folder where the new firmware (the DAP package
file) is stored, select the DAP package file, and click Open.
The new firmware information appears in the 4710 Package:
field.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
