Nortel CS 1000 User Manual

Use the Location builder tool 241
— RPN numbers
— MAC addresses
— Info field
The DAP list shows a list of DAPs that are not yet on the
map. You can drag these DAPs onto map.
Populate the DAP list by adding new DAPs to the
RPNadm.txt file, using menu item File > Import.
• In the Edit box area, you can edit properties of the selected
location, building, or DAP. After editing the values in the Edit
box, click Set to save your changes.
•
Use the Floor controls to add or delete a floor or set the
location of a floor.
•
Use the Draw controls to add a DAP, a building, or a line.
•
Use the View controls to change the view of the Map pane.
•
Use the Options controls to customize display options.
--End--
Create a location file
Use the steps in the following procedure to create a location file.
Prerequisites
•
Ensure that you have up-to-date maps of the building(s). You can
import a map of a building or floor from a bmp, .gif and .jpg file.
•
Ensure that you have a clear understanding of the sizes of the area
and the buildings. Ensure that the maps use a common scale; if they
do not, ensure that you understand how they differ.
Use the steps in the following procedure to create a location file.
Procedure 119
Creating a location file
Step Action
1 To start the DAP configurator tool through the Start menu,
choose Start > All programs > DAP controller > DAP
Applications > Location Builder.
The Location builder main screen appears.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.

Nortel CS 1000 Specifications

General

Brand	Nortel
Model	CS 1000
Category	Server
Language	English