Multi site mobility network configuration 179
9 If you configured CDP, select Private level 0 regional (CDP
location code) for DN type, enter the trunk steering code
(TSC) and question marks (?) equal to number of digits of DN
subscribed to DAP, for example 44????, for DN Prefix and 1 for
Route cost and click Save.
10 Save changes.
ATTENTION
The described configuration on NRS must be performed on each
system for MSMN. Location or Trunk Steering codes must correspond
with the codes configured on each system.
--End--
Call server configuration to MSMN
In this document the following parameters are used to show an example of
configuring an MSMN SIP DECT system.
• Codes on system 1
— Access Code: 9
—
Location code to DAP: 442
—
Trunk steering code to DAP: 44
—
Location code to system 2: 335
•
Codes on system 2
—
Home location code: 335
—
Access Code: 9
—
Location code to DAP: 332
—
Trunk steering code to DAP: 33
See Figure 52 "Example of an MSMN SIP DECT system" (page 180).
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
