DAP deployment rules and requirements 35
Figure 7
Critical points
Rules and guidelines to locate cell centers
Figure 8 "Cell centers" (page 36) shows the following.
• stairwell
• second floor plan
To locate a call center, place the deployment tool at one critical point, for
example P1, and then use the deployment handset to obtain a change
in audio quality. The audio quality change determines the cell boundary
contour. This process is repeated at an adjacent critical point, for example
P2. Where the cell boundaries of both critical points meet is the cell
center. The cell center position is marked on a floor plan. The cell center
determines the location of a basestation, shown in Figure 8 "Cell centers"
(page 36), as arc 2C1.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
