Simple SIP DECT configuration 169
If you plan to create a Branch Office Configuration, see Perform
configuration on NRS.
--End--
Configuring routing entries for the signaling server
Note:
If Collaborative servers are not configured on your system, you
can configure the default route for CDP for the Signalling Server instead
of CDP routing entry.
Procedure 81
Configuring routing entries for the signaling server
Step Action
1 Select Routing Entries from the menu list on the left. .
2 Click Look Up.
The Look up path for gateway endpoints page appears.
3 Select the SIP endpoint for the signaling server, for example
SS_Node55_Ldr.
4 Click Show to see all the entries for this endpoint.
This field is empty if there are no entries.
5 Click Add.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
