168 System configuration
Configuring routing entries for DAP Redirect Server
Procedure 80
Configuring routing entries for DAP Redirect Server
Step Action
1 Select Routing Entries from the menu list on the left.
2 Click Look Up.
The Look up path for gateway endpoints page appears.
3 Select the for DAP, for example, DAP1. Enter the ID of the
selected endpoint in the Gateway Endpoint text box.
4 Click Show to see all the entries for this endpoint.
This field is empty if there are no entries.
5 Click Add.
6 If you configured UDP, select Private level 1 regional (UDP
location code) for DN type, enter the location code (LOC) and
question marks (?) equal to number of digits in DN subscribed
on the DAP, for example 442????, for DN Prefix and 1 for Route
cost and click Save.
7 If you configured CDP, select Private level 0 regional (CDP
steering code) for DN type, enter the Trunk Steering code
(TSC) and question marks (?) equal to number of digits in DN
subscribed on DAP, for example 44????, and click Save.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
