Overview of SIP DECT 15
— For access based on the configured Coordinated Dialing Plan
(CDP), compose the Target DN as follows. <TSC>+<LOCAL DN>.
— For access based on the configured Uniform Dialing
Plan
(UDP),
compose
the
Target
DN
as
follows.
<AC1
or
AC2>+<LOC>+<LOCAL DN>.
A UEXT corresponding to a DECT handset on the SIP DECT system
reflects the idle or busy status of the associated handset by a check for a
call processed between the handset and a DAP.
The Nortel Integrated SIP DECT system provides the following UEXT
features.
•
Making and receiving simple calls
•
Call Hold. There can be only one active call and one call on hold for a
handset
•
Consultative or Announced Call Transfer
•
Blind Call Transfer
•
Participation in a conference call if another party adds the DECT
handset to the conference
•
Calling Line ID (CLID) and Calling Party Name Display (CPND) for
simple calls not involving call transfer
•
CLID and CPND for an internal line (digital or IP phone with display)
calling to, or receiving a call from a DECT handset
•
Sending DTMF tones through the established connection to interact
with the called line (party), for example, to work with CallPilot
•
Support for a voice mailbox on CallPilot and MWI
•
Call Forward No Answer
•
Call Forward By Time of Day
•
Call Forward Busy
• Hunting
• Call Restrictions applicable to a UEXT
• Twinned configuration (typically a desk phone plus a DECT handset)
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 01.07
6 January 2009
Copyright © 2008-2009 Nortel Networks
.
To Next Page
Loading...
Need help?
General
